05-08-2023, 08:30 AM
The Ultra-fine Pin Type Horizontal Beads Mill is a continuous production machine for grinding liquid materials. The design of the grinding chamber is with a small length/diameter ratio and high energy density; Adopting external driven screen discharge device, which is with large discharge area; Adopting pin type rotors to force grinding medium to do irregular collision, which greatly improve the grinding efficiency and also make the equipment suitable for grinding high viscosity slurry. Use φ 0.5mm-2.0mm yttrium stabilized zirconium beads (95% zirconium content). The machine is featured in excellent grinding fineness, generally can grind materials down to below 5 microns, and some can reach sub-micron or even nanometer level; The sealing structure adopts double-end mechanical seal equipped with self-lubricating system. The sealing liquid shall be compatible with the material. With German mechanical seal technology, perfluorinated sealing ring, it can withstand multiple solvents. The mechanical seal is with good reliability and durability; The special high wear-resistant alloy steel material ensures the service life of the equipment; Using segmented double spiral cooling jacket is more efficient for heat exchange, which ensures the product final fineness and grinding efficiency, and also ensures the finished product quality.Get more news about pin bead mill,you can vist our website!
Zili Nano pin-type bead mill with circulating grinding system is suitable for almost all products and different viscosities.
The smallest bead diameter is 0.1mm. Our machine can achieve the biggest output and nano-fineness quickly.
The smallest fineness can reach D97＜100nm.
Technical advantages: large flow, cycle grinding
A shorter, wider grinding chamber can reduce the flow inertia force
Process control is simple and convenient
Longer, larger separation system
The cycle grinding process continues until the quality requirement is met
High flow ensures efficient cycle operation
The low material temperature can be controlled
The grinding shaft can be cooled
Cooling and exchange systems can be added onto material tanks
High energy grinding system with a big force
One or more times pass type with bigger output
Small size machine with the same speed can reduce the material loss in refeeding process
Additional raw materials/additives in the formulation can be added during the milling process
Zili Nano pin-type bead mill with circulating grinding system is suitable for almost all products and different viscosities.
The smallest bead diameter is 0.1mm. Our machine can achieve the biggest output and nano-fineness quickly.
The smallest fineness can reach D97＜100nm.
Technical advantages: large flow, cycle grinding
A shorter, wider grinding chamber can reduce the flow inertia force
Process control is simple and convenient
Longer, larger separation system
The cycle grinding process continues until the quality requirement is met
High flow ensures efficient cycle operation
The low material temperature can be controlled
The grinding shaft can be cooled
Cooling and exchange systems can be added onto material tanks
High energy grinding system with a big force
One or more times pass type with bigger output
Small size machine with the same speed can reduce the material loss in refeeding process
Additional raw materials/additives in the formulation can be added during the milling process
