06-08-2023, 02:12 AM
Not too long ago, before CAD was introduced, engineers made their drawings and calculations by hand. Today, that would be considered a struggle. Engineers only drew three different views on their sheet of paper, and they had to simplify their product in order to make calculations of its behavior if external forces were applied. With the introduction of computer-aided design (CAD) software, it was suddenly possible for engineers to create accurate 3D models. With further technological advancements, these 3D models can now be analyzed using computer-aided engineering (CAE) software.To get more news about 2d construction drawing software, you can visit shine news official website.
On the way to being a qualified mechanical engineer, the first thing students learn is how to solve mechanical problems. In this example, our mechanical problem is the need to find out how wind affects the Olympic Tower in Munich.
The first thing we do is simplify the model. Details and features of the tower (including the restaurant and antenna) that might not be needed for a rough mechanical calculation are going to be eliminated.
At first, we make a rough drawing of the tower, which in our case is a simple line on the paper. We estimate the wind as a constant force at the tip of the tower with the goal of the calculation being to get the momentum at the bottom of the tower. The equation would simply be the force of the wind times the height of the tower.
This model is extremely simplified. Everyone—including the person that is responsible for the success of the project—knows that in reality it is much more complicated than that, and they would want a more sophisticated calculation of the problem.CAD is the abbreviation for computer-aided design, which refers to using a computer to visualize a product idea. CAE is the abbreviation for computer-aided engineering, which is the analysis of the designed visualization. In short, the difference between CAD and CAE can be put this way: CAD is for designing a product and CAE is for testing and simulating it.
Mesh of the Olympic Tower Munich created with SimScaleSo let’s get back to the key point: what is the difference between CAD and CAE? At a first glance, the models used by CAD and CAE software almost look the same. However, a closer inspection reveals that they are fundamentally different. They both have the shape of the product, however, from a mathematical standpoint, they do not have a lot in common.
There are different ways of combining geometrical elements to form a 3D geometry. Most likely, CAD models are designed as an assembly of volumes or bodies with parameters like the density of the actual material. The model widely used for CAD modeling is a parametric model with a construction history. This provides the advantage of being able to change features retrospectively, which allows 3D objects to be built as a combination of geometrical shapes with parameters.
In a CAE environment, the CAD model is transformed into a mesh during pre-processing. The mesh either consists of cubes, cuboids or tetrahedrons, so generally polygon meshes. Therefore, it is legitimate to compare a CAD model to a vector graphic, whereas a CAE model could be described as a pixelated model.
This clearly shows that you cannot just transform a CAD model into a CAE model. The modeling of spheres, for example, will be a problem you will face. It is impossible to do this with volumes that have corners, but if the single volumes of the mesh are small enough, it can be a good approximation.
After the pre-processing is complete, the calculation starts. This differs according to the problem you need to solve and the type of simulation, such as finite element analysis, computational fluid dynamics, or thermal analysis.
In the previous example, after having designed the tower with CAD, a finite element analysis would be used to calculate the forces of the wind affecting the Olympic Tower.
On the way to being a qualified mechanical engineer, the first thing students learn is how to solve mechanical problems. In this example, our mechanical problem is the need to find out how wind affects the Olympic Tower in Munich.
The first thing we do is simplify the model. Details and features of the tower (including the restaurant and antenna) that might not be needed for a rough mechanical calculation are going to be eliminated.
At first, we make a rough drawing of the tower, which in our case is a simple line on the paper. We estimate the wind as a constant force at the tip of the tower with the goal of the calculation being to get the momentum at the bottom of the tower. The equation would simply be the force of the wind times the height of the tower.
This model is extremely simplified. Everyone—including the person that is responsible for the success of the project—knows that in reality it is much more complicated than that, and they would want a more sophisticated calculation of the problem.CAD is the abbreviation for computer-aided design, which refers to using a computer to visualize a product idea. CAE is the abbreviation for computer-aided engineering, which is the analysis of the designed visualization. In short, the difference between CAD and CAE can be put this way: CAD is for designing a product and CAE is for testing and simulating it.
Mesh of the Olympic Tower Munich created with SimScaleSo let’s get back to the key point: what is the difference between CAD and CAE? At a first glance, the models used by CAD and CAE software almost look the same. However, a closer inspection reveals that they are fundamentally different. They both have the shape of the product, however, from a mathematical standpoint, they do not have a lot in common.
There are different ways of combining geometrical elements to form a 3D geometry. Most likely, CAD models are designed as an assembly of volumes or bodies with parameters like the density of the actual material. The model widely used for CAD modeling is a parametric model with a construction history. This provides the advantage of being able to change features retrospectively, which allows 3D objects to be built as a combination of geometrical shapes with parameters.
In a CAE environment, the CAD model is transformed into a mesh during pre-processing. The mesh either consists of cubes, cuboids or tetrahedrons, so generally polygon meshes. Therefore, it is legitimate to compare a CAD model to a vector graphic, whereas a CAE model could be described as a pixelated model.
This clearly shows that you cannot just transform a CAD model into a CAE model. The modeling of spheres, for example, will be a problem you will face. It is impossible to do this with volumes that have corners, but if the single volumes of the mesh are small enough, it can be a good approximation.
After the pre-processing is complete, the calculation starts. This differs according to the problem you need to solve and the type of simulation, such as finite element analysis, computational fluid dynamics, or thermal analysis.
In the previous example, after having designed the tower with CAD, a finite element analysis would be used to calculate the forces of the wind affecting the Olympic Tower.
